3.1.4 Тип навојног споја
Стандардно
ПримедбаChina Oxygen Storage Tank, Ln2 Storage Tank, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
DN10, 3/8″
Нерђајући челик серије 300
ASME B31.3
Притисак дизајна.
08 је 8 бара,
16 је 16 бара.
| VМатеријал унутрашње цеви. | ДБ02508 | Препоручено ≤ DN25 или 1″. Или бира тип вакуумског бајонетског прикључка са прирубницама и вијцима (од DN10, 3/8″ до DN80, 3″), тип завареног прикључка (од DN10, 3/8″ до DN150, 6″) | Пројектовани притисак: | |
| Д је 316Л, | Е је друго. | ХЛХС | Тип | 00X |
| DN15, 1/2″ | Б020 | Б020 | 00X | DN20, 3/4″ |
| ХЛХС | No | No | Б025 | 00X |
| Nominal Diameter of Inner Pipe | Препоручено од стране стандарда предузећа за криогену опрему HL. Такође се може произвести према захтевима купца. | Препоручено ≤ DN25 или 1″. Или бира тип вакуумског бајонетског прикључка са прирубницама и вијцима (од DN10, 3/8″ до DN80, 3″), тип завареног прикључка (од DN10, 3/8″ до DN150, 6″) | Номинални пречник спољашње цеви: | Препоручено од стране стандарда предузећа за криогену опрему HL. Такође се може произвести према захтевима купца. |
| Design Pressure | Препоручено ≤ 16 бара. Или бира тип завареног споја (≤40 бара) | 3.2 Динамички вакуумски изоловани систем цеви | Без посебних захтева, материјал унутрашње и спољашње цеви биће изабран исти. | 3.2 Динамички вакуумски изоловани систем цеви |
| 3.2.1 Вакуумски бајонетски тип прикључка са стезаљкама | Номинални пречник унутрашње цеви | Номинални пречник унутрашње цеви | Тип | Номинални пречник унутрашње цеви |
| Пројектовани притисак | Материјал | |||
| унутрашње цеви | Стандардно | |||
| Material | 300 Series Stainless Steel | |||
| Вакуумски бајонетски тип прикључка са стезаљкама за динамичко вакуумски изоловано флексибилно црево | LN2DN10, 3/8″28 бара | |||
Нерђајући челик серије 300
ASME B31.3
Материјал унутрашње цеви.
| А је 304, Б је 304Л, | C је 316, | |
| Д је 316Л, | Е је друго. | ХЛХ |
| ДБ01508 | DN15, 1/2″ | ХЛХ |
| ДБ02008 | Материјал спољне цеви | Материјал спољне цеви |
| ДБ02508 | Материјал спољне цеви | Материјал спољне цеви |
| Препоручено ≤ DN25 или 1″. Или бира тип вакуумског бајонетског прикључка са прирубницама и вијцима (од DN10, 3/8″ до DN80, 3″), тип завареног прикључка (од DN10, 3/8″ до DN150, 6″) | Материјал спољне цеви | Материјал спољне цеви |
| Пројектовани притисак: | Материјал спољне цеви | Материјал спољне цеви |
Без посебних захтева, материјал унутрашње и спољашње цеви биће изабран исти.
Стање напајања:
Локација треба да напаја вакуум пумпе и да обавести HL Cryogenic Equipment о локалним информацијама о електричној енергији (напон и херци).
3.2.2 Вакуумски бајонетски тип прикључка са прирубницама и вијцима
одел
Веза
Тип
Номинални пречник унутрашње цеви
Пројектовани притисак
Материјал
унутрашње цеви
Стандардно
Примедба
HDF010
00X
8~16 бара
DN10, 3/8″
8~16 бара
Нерђајући челик серије 300
ASME B31.3
Притисак дизајна.
08 је 8 бара,
16 је 16 бара.
Материјал унутрашње цеви.
А је 304,
Б је 304Л,
C је 316,
Д је 316Л,
Е је друго.
Ф015
00X
DN15, 1/2″
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSФ040X | Пошаљи упит: Спреман/на сам да сазнам више | DN10, 3/8″ | Бенгалски
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ШпанскиНоминални пречник спољашње цеви:X | DN15, 1/2″ | |||||
| ШпанскиПрепоручено ≤ 16 бара. Или бира тип завареног споја (≤40 бара).X | DN20, 3/4″ | |||||
| ШпанскиСтање напајања:X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Канада
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Стандардно
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Шпански08 је 8 бара,00X | и 25, 32, 40. | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ШпанскиСинди00X | DN15, 1/2″ | |||||
| ШпанскиТаџик00X | DN20, 3/4″ | |||||
| ШпанскиТајландски00X | DN25, 1″ | |||||
| ШпанскиУзбечки00X | DN32, 1-1/4″ | |||||
| ШпанскиКоса00X | DN40, 1-1/2″ | |||||
| ШпанскиЗулу00X | DN50, 2″ | |||||
| ШпанскиОријска00X | DN65, 2-1/2″ | |||||
| ШпанскиF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN150, 6″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Стање напајања:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
одел
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8″ | DN10, 3/8″ | Нерђајући челик серије 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ШпанскиDN15, 1/2″00X | DN15, 1/2″ | |||||
| ШпанскиDN20, 3/4″00X | DN20, 3/4″ | |||||
| ШпанскиDN25, 1″00X | DN25, 1″ | |||||
| ШпанскиW03200X | DN32, 1-1/4″ | |||||
| ШпанскиW04000X | DN40, 1-1/2″ | |||||
| ШпанскиW05000X | DN50, 2″ | |||||
| ШпанскиW06500X | DN65, 2-1/2″ | |||||
| ШпанскиW08000X | DN80, 3″ | |||||
| HКинеска велепродаја Кина 195Л 1.4MPa течност за заваривање...00X | DN100, 4″ | |||||
| HБрза испорука за машину за течни азот из Кине...00X | DN125, 5″ | |||||
| HПаметан избор за00X | DN150, 6″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Брзе везе
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSОпрема за подршку цевоводних система00X | Пошаљи упит: Спреман/на сам да сазнам више | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Шпански+86 1809011164300X | DN15, 1/2″ | |||||
| ШпанскиФранцуски00X | DN20, 3/4″ | |||||
| ШпанскиРуски00X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Дански
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Чешки
Африканс
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLЈерменскиX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | Бенгалски
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHФризијскиX | DN15, 1/2″ | |||||
| HLHГуџаратиX | DN20, 3/4″ | |||||
| HLHХавајскиX | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Канада
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
Латински
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLМарати00X | Бурмански | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDСинди00X | DN15, 1/2″ | |||||
| HLHDТаџик00X | DN20, 3/4″ | |||||
| HLHDТајландски00X | DN25, 1″ | |||||
| HLHDУзбечки00X | DN32, 1-1/4″ | |||||
| HLHDКоса00X | DN40, 1-1/2″ | |||||
| HLHDЗулу00X | DN50, 2″ | |||||
| HLHDОријска00X | DN65, 2-1/2″ | |||||
| HLHDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN150, 6″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2″ | |||||
| HLHDW02000X | DN20, 3/4″ | |||||
| HLHDW02500X | DN25, 1″ | |||||
| HLHDW03200X | DN32, 1-1/4″ | |||||
| HLHDW04000X | DN40, 1-1/2″ | |||||
| HLHDW05000X | DN50, 2″ | |||||
| HLHDW06500X | DN65, 2-1/2″ | |||||
| HLHDW08000X | DN80, 3″ | |||||
| HLHDW10000X | DN100, 4″ | |||||
| HLHDW12500X | DN125, 5″ | |||||
| HLHDW15000X | DN150, 6″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
3.2.4 Thread Joint Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8″ | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2″ | |||||
| HLHDB02000X | DN20, 3/4″ | |||||
| HLHDB02500X | DN25, 1″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1″. Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8″ to DN80, 3″), Welded Connection Type (from DN10, 3/8″ to DN150, 6″)
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for Factory Directly supply China 2000L/1.6/2.6/3.4MPa LNG Storage Tank Liquid Nitrogen Argon CO2 Cylinder Storage, In a word, when you choose us, you choose a ideal existence. Welcome to visit our factory and welcome your get! For even further inquiries, remember to usually do not hesitate to make contact with us.
Factory Directly supply China Oxygen Storage Tank, Ln2 Storage Tank, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
